34pcs Car Paintless Dent Removal Kits Repair Tools Hammer T-Bar Glue Puller

Description

Features:
Professional design
Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
Paintless repair
The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint, even the rubber hammer suitable for uneven dents has a good rubber package.
Widely used
Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
DIY
Tools coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our PDR tool kit can help you repair your cars by yourself for many times, so it can save a lot of money and time for you.
Returns Guarantee
You will enjoy professional service center, 30-day full amount refunding, quality warranty and technical support. Excellent customer service brings you no worries after purchase. Please feel free to reach us if you have any question or dissatisfaction.
Step-By-Step Instructions for Repairing Car Paintless Dent
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plugin the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime-sized amount of glue is released. Use a ‘pea’ sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin the repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
9a. The T-Hand Puller may be used for larger dents or to remove the last 10-20% of a dent.
10. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
11. Spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper.
12. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
Specifications
:
Material: Metal, Plastic
Color: As picture shown
Slide Hammer Size(as picture shown): Approx. 49.8 * 11.9cm / 19.6 * 4.68in
About hot melt glue gun:
Material: Plastic & Aluminum
Working power: 20W
Working voltage: 100 to 230V
Working temperature: 356 to 392?
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
Note
: Better
Hot
compress
shell
before
pull the shell
Package Included:
1x 2-in-1 Dent Removel T Bar Tools
1x 20w Glue Gun
18x Glue Pulling Tabs
10x Glue Sticks
1x Empty Bottle
1x Glue Removal Scrapper
1x Dish Cloth
1x Instruction